Transmission loss function



In this section, a simple derivation is made for an approximately loss function. First, a expression of line losses in terms of high voltages and phase angles is made. Let Pij , denote real power flow from bus i to bus j. From the load flow equations, one can write:



By adding these two equations, one obtains the loss for line (i-j):


If all voltages are at nominal values, (e.g. base voltages) then:
 as a result


Let M denote the line-bus incidence matrix with order NL×N if the slack bus is included where NL and N are number of system lines and buses respectively with [S] = [S1 S2 … Sn]t. Also, let Y denote the vector of angular differences across all lines with order NL×1, then one can write:

Let G be a diagonal matrix of line conductance's with order NL × NL , i.e.:


It is possible to use equations from (2-1) to (2-7) to show that line losses are given by:


The vector d can be approximated by the DC load flow approach, with:


for i=1….N and the vector d has elements di for i=1...... N and the matrix A has dimensions N×N.

As a result, using eq. (2-6), eq. (2-8) and eq. (2-9) line losses become:


The vector PG has dimensions n×1, and the vector PD has dimensions n×1 which have the generation and demands at all system buses.
Thus, in an approximate manner, PL is a quadratic function of PG. The expression for PL is known as a loss formula. There are a variety of other loss formula depending on the degree of approximation employed. It is clear that system losses depends strongly on the matrix B (known as the B-Coefficient matrix), this matrix is strongly dependent on the system topology (both M and A dependent), and the network admittance's (G is dependent on line conductance and A on susceptances).
Eq. (2-13) can be rewritten for n power plants as:


Where: Pi and Pk are the power outputs at buses i and k respectively. [P]t vector of [P1, P2, ……, Pn]t with order n where the element i for example is equal PGi-PDi and the B coefficient matrix is given by:


The elements of matrix B are function of the line resistance's and reactance and the system operating point.
On the other side, there are other forms of loss formula as below the complex power at bus i is:


Then the complex power loss of the system in terms of bus admittance or bus impedance is:


For bus impedance form with:



Where Rik, Xik are resistance and reactance of line connected between bus i and bus k respectively, di , Vi  are bus voltage angle and magnitude at bus i. Equation (2-20) reduces to give the active PL, and reactive, QL, system loss as:


The complex form of power loss given by eq.(2-20) can be given in matrix form as:


Where P and Q are bus power vectors and a, t, q and d are n×n matrices.
The generation units penalty factors are:


SHARE

Ahmad Mohammad

Hi. I’m Designer of Mawsoo3a Blog. I’m Electrical Engineer And Blogger Specializing In Electrical Engineering Topics. I’m Creative.I’m Working Now As Maintenance Head Section In An Industrial Company.

  • Image
  • Image
    Blogger Comment
    Facebook Comment

0 comments:

Post a Comment